Model Assembly; Tail Installation - Horizon Hobby E-Flite Pawnee Brave Night Flyer Manuel D'utilisation

Model Assembly

Main Gear Installation
Secure the main gear assembly to the fuselage using 4 screws (A).

Tail Installation

1. Connect the light connector (Servo style) from the horizontal stab to the
fuselage.
2. Install the horizontal stab to the fuselage with the control horn facing down.
3. Connect the internal light connector (JST style) from the vertical fi n to the
connector coming from the top of the horizontal stab.
4. Align the vertical fi n to the top of the horizontal stab.
5. Secure the tail assembly to the fuselage with the included 2 screws (A) as
shown.
6. Connect the rudder control horn to the respective clevis (B) as shown.
7. Connect the elevator control horn to the respective clevis (C) as shown.
A
B
EN
A
C
5