9. MAINTENANCE
WARNING!
ANY WORK CARRIED OUT ON THE APPLIANCE BY THE USER STRICTLY REQUIRES
THE POWER PLUG BEING DISCONNECTED FROM THE MAINS SOCKET.
The equipment manager is obliged to check and comply with the maintenance deadlines in the table
indicated below.
OPERATION
Cleaning the outer surface
Cleaning the accessible inner parts
Checking the power supply, electrical plugs and/or sockets
Seals intactness check
Water collection tank cleaning
Fridge system tubing intactness check
Inspecting the cables and inner power connections
Replacing the led lights
Replacing the power supply cable
Control panel replacement
Any other maintenance operation not planned in the previous points should be carried
out by the support centres authorised by our dealers or by qualified staff.
10.
CLEANING
10.1
OUTER CLEANING
For a good preservation of the cabinet's body a periodical cleaning is
necessary.
1. EXTERNAL BODY: When necessary, the external body should be cleaned
with a cloth and a neutral soap and water solution.
2. SURFACES IN PLASTIC MATERIAL: Wash with warm water and mild deter-
gent, rinse well and dry with soft cloth; under no circumstances should
alcohol, methylated spirits or solvents be used.
3. GLASS SURFACES: Only use products specifically designed for glass cle-
aning; It is not advisable to use ordinary water which can leave a film of
calcium on the surface of the glass.
(do not use tools)
(electronic control unit)
ORDINARY /
FREQUENCY
EXTRAORDINARY
MAINTENANCE
Based on use
Ordinary
Based on use
Ordinary
Six-monthly
Ordinary
Six-monthly
Ordinary
Based on use
Ordinary
Six-monthly
Ordinary
Six-monthly
Ordinary
-
Extraordinary
-
Extraordinary
-
Extraordinary
AUTHORISED
STAFF
User
User
User
User
Technical support
Technical support
Technical support
Technical support
Technical support
Technical support
1
3
2
-32-