7.2 SELECTING THE PLACE OF INSTALLATION
In selecting the place of installation, ensure that the following instructions are observed, this being vital for proper
and troublefree working of the cabinet:
•
Do not install the cabinet outdoors.
•
Do not install the cabinet in the vicinity of heating radiators or other heat sources.
•
Do not install the cabint where it is exposed to direct sun light (e.g. through
windows).
•
Do not install the cabinet where it is exposed to drafts from ventilators
open doors.
•
Pay attention to air outlet from air conditioners/ ventilators.
•
Keep the air intake and outlet area around the plinth area of the cabinet
clear of cartons and other obstacles.
•
It is necessary taht the condensing unit obtains a good circulation of air
around it; also the area around the condensing unit should not be obstructed
by boxes or other objects; keep a distance from the wall of 10 cm. at least.
7.3 POSITIONING
The equipment has 4 one-directional wheels and 2 adjustable shelves, to stop and position the
equipment screw in or out the feet 10 mm lower than the wheels.
It is strictly necessary after positioning to stabilise the equipment on the ground.
Stop the cabinet by feet.
Air-Condition
-28-