Télécharger Imprimer la page

IARP GLEE 45wv2 Lite Instructions Pour L'utilisateur page 29

Publicité

Les langues disponibles
  • FR

Les langues disponibles

7.6 FURTHER INFORMATION
Take out packaging and clean all the cabinet using warm water together with 5% of neutral soap then dry it with a soft cloth;
for the glass parts only use specific products, avoiding the use of water which can leave on the glasses limestone residues.
It is fundamental to comply with the distances indicated (cm) for correct installation of the equipment.
• Cabinet must be installed on a perfectly even surface, far away from any heat source (radiators, stoves, etc)
including sun rays.
• It is necessary that the capacitor unit is in the free air exchange condition, therefore the ventilation zones
must not be obstructed by boxes or otherwise.
• Install and position the unit in such a way so as to allow easy access to the power socket.
• Never place containers of liquid on or immediately above the ticket counter; should the content spill out, it
would damage the counter.
THE REFRIGERATOR IS NOT SUITABLE FOR WORKING IN DANGEROUS ENVIRONMENT WITH RISK OF FIRE,
EXPLOSIONS OR RADIATIONS.
Operation is regular with ambient temperature indicated on technical data plate.
7.7
DOOR OPENING
Warning!
MAXIMUM ANGLE OF DOOR OPENING = 140°
For correct working of the torsion bar and to avoid any break
of the door or of the hinge do not exceed the maximum angle
of door opening i.e. 140°.
10
-30-

Publicité

loading

Ce manuel est également adapté pour:

Glee 45 liteGlee 45 prime