AYA ATI3/3 Manuel D'utilisation page 67

WARNING: Ensuring Adequate Ventilation
Make sure the induction cooker hob is well ventilated and
that air inlet and outlet are not blocked. In order to avoid
accidental touch with the overheating bottom of the hob, or
getting unexpectable electric shock during working, it is
necessary to put a wooden insert, fixed by screws, at a
minimum distance of 50mm from the bottom of the hob.
Follow the requirements below.
There are ventilation holes around outside of the
hob. YOU MUST ensure these holes are not blocked
by the worktop when you put the hob into position.
• Be aware that the glue that join the plastic or
wooden material to the furniture, has to resist to
temperature not below 150˚C, to avoid the unstuck
of the paneling.
• The rear wall, adjacent and surrounding surfaces
must therefore be able to withstand an
temperature of 90˚C.
Before installing the hob, make sure that
• The work surface is square and level, and no structural
members interfere with space requirements.
• The work surface is made of a heat-resistant and insulated
material.
• If the hob is installed above an oven, the oven has a built-in
cooling fan.
Min. 5 cm
Max. 5 mm
66
Max. 5 mm