AYA ATI3/3 Manuel D'utilisation page 52

If the display flashes
setting
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you're using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking
zone.
No heating takes place unless there is a suitable pan on the
cooking zone.
The display "
no suitable pan is placed on it.
Finish cooking
Turn the cooking zone off by scrolling down
to "0" or touching "
together. Make sure the display shows "0".
Turn the whole cooktop off by touching the
ON/OFF control.
Beware of hot surfaces
H will show which cooking zone is hot to
touch. It will disappear when the surface has
cooled down to a safe temperature. It can
also be used as an energy saving function
if you want to heat further pans, use the
hotplate that is still hot.
" will automatically disappear after 1 minute if
" and "
alternately with the heat
" control
51