Publicité
Les langues disponibles
Les langues disponibles
Solving problems
Warning
The temperature or humidity
of a zone is out of range.
•
Zone »X« Temperature
is out of range.
The average humidity value
blinks because the humidity
of one or more zones is
below 40%.
72
Cause/Solution
The temperature in an individual room is outside the permitted limits.
You can find more information regarding possible causes and
potential solutions for this notification in section »Tips & Tricks«
In the event that this occurs for a longer period of time since the last
intervention in the device (change of setting, loading of bottles,
opening of doors,...) it may mean that temperature sensor is out of
order. Contact a service center to correct the error. The appliance
will operate in safe mode until repaired by a service technician.
The appliance will automatically maintain the most suitable
temperature for each temperature zone.
Pop-up will show. It can be removed by pressing X key, Confirm key
or "Go to Humidity" button.
By pressing the average humidity value on the status screen, you
can see which zone has the blinking humidity value. We advise for
convenience to take the chance to refill all boxes, although refilling
only according humidity box zone will also stop the notification.
Publicité
