Publicité
Les langues disponibles
Les langues disponibles
Installation and connection
12
When the appliance is placed on the intended
surface, it should be completely level in order
to decrease vibration. To level the appliance,
use the adjustable feet at the front of the
appliance. An open wrench size 17 is required
for adjusting and fastening the feet.
•
Place the appliance at least 50 mm away
from an electric or gas stove, and at least
300 mm away from a heat source (e.g. a
radiator or a heater). If such clearance is
not possible, then install an insulation
panel.
•
The appliance should not be exposed to
direct sunlight.
•
We recommend free-standing installation
of the appliance. When necessary, it can
also be placed adjacent to cabinetry, if
adequate ventilation and cooling of the
installation location (e.g. air-conditioning)
are provided. In such a case, the
appliance power consumption is likely to
increase.
•
There has to be a clearance of at least 50
mm between the appliance and any
cabinet above it.
Publicité
