Atag KA8074K3C Mode D'emploi page 273

Remote control
Camera
Time Zone
Set the according Time Zone to your location.
Time and Date
Switch on the appliance's Remote Control to
change the appliance settings from the
application.
1. Tap on the switch to turn On' to enable
remote control.
2. Press on the Confirm' key to save and
continue.
When the camera functionality is enabled, the
camera will only be activated when a "scan"
action is taking place. When the camera
functionality is disabled, wine data can only
be added manually.
1. Tap on the toggle switch to turn On' to
enable the camera.
2. Press on the Confirm' key to save and
continue.
If a network connection has not been
established you will need to set the current
date and time manually.
1. Tap on the arrows above and below the
hours and minutes to adjust these.
2. Press on the Confirm' key to save the time
and continue.
Operation
37