Télécharger Imprimer la page

Atag KA8074K3C Mode D'emploi page 305

Publicité

Les langues disponibles

Les langues disponibles

Humidity out of range
Possible cause
Frequent and/or long door
openings.
Recent big changes in
temperature settings.
Recent start-up of the
appliance.
Extreme ambient
temperatures and/or humidity
levels.
In case none of the above countermeasures helped and the "humidity out of range" warning persists,
please contact a service center.
Power failure
Possible cause
Recent and/or frequent
power failure.
Error notifications
If a component inside the appliance is failing, a notification will pop-up.
The notification will display a code. Codes for these errors can be found in the table below.
Error
Description
Code
E0
Communication error from power board to user interface electronics.
E2
Communication error from power board to wireless network card.
E3
Communication error from wireless network card to power board.
E8
Communication error from user interface electronics to power board.
Countermeasures
Try to minimize opening the door of the wine climate cabinet
appliance. Prepare loading plan of large quantities of bottles in
advance to minimize the required time for loading.
Try to use the ConnectLife mobile application as much as possible
to change appliance settings.
Making larger changes of the temperature settings may take the
appliance a few hours to reach new settings.
Humidity levels in the appliance are strongly dependent on the
temperature changes and take longer to stabilize.
It may take a few hours for the appliance to cool to the requested
setting after being turned on.
Humidity levels in the appliance are strongly dependent on the
temperature changes and take longer to stabilize.
Make sure that the appliance is installed in a well ventilated room
and is not exposed to extremely high or extremely low temperatures.
Humidity levels in the appliance are strongly dependent on the
temperature changes and take longer to stabilize.
For detailed appliance installation instructions please refer to the user
manual [see chapter "Selecting the location"].
In case of use in ambient with extremely high or extremely low
humidity levels you can purchase a humidity stabilizer accessory set.
Countermeasures
If this power cut-outs appear to be frequent, contact professional
electrician to check electrical fuses, outlets and appliance's power
connecting cable.
Solving problems
69

Publicité

loading