Publicité
Les langues disponibles
Les langues disponibles
Description of the appliance
INFORMATION!
Before you start adding accessories to the drawer, check once more whether the drawer is
correctly placed on the telescopic rails.
26
The drawer can also be removed from the
appliance without removing the serving bottle
shelf from its rails. To do this, fully open the
drawer, lift it at the front (1) and pull it towards
you.
To replace the drawer, follow the same
procedure in the reverse order: push the
drawer along the rails to the hook (d) on the
back of the rails. When the drawer is blocked
on the rear side, lower it at the front so that the
grooves (a) can be placed over the hooks (c).
If the shelf (13) and drawer (14) are not aligned
at the front (d≠0), first completely pull out the
drawer to access the drawer opening
mechanism on the back wall. Press on the
spacer (A) to release the mechanism. Rotate
the spacer to adjust the length.
Situation "a": rotate the spacer in anti-clockwise
direction (1). Compared to the initial state, the
spacer moves outward relative to the drawer,
i.e. it is extended. When you push the drawer
back into the appliance (2), the drawer will be
positioned slightly more to the front of the
appliance (3).
Situation "b": rotate the spacer in clockwise
direction (1). Relative to the initial state, the
spacer moves toward the drawer, i.e. it is
shortened. When you push the drawer back
into the appliance (2), the drawer will be
positioned slightly more to the back of the
appliance (3).
Repeat the process until the shelf and the
drawer are flush at the front (d=0) – situation
"c".
Publicité
