Publicité
Les langues disponibles
Les langues disponibles
Description of the appliance
24
Serving bottle shelf also allows storing bottles
in two positions: horizontally or tilted/inclined.
The front part of the shelf (a) can be lifted (1)
and supported by the rotated (2) lateral
supports (b, c). Up to 6 Bordeaux bottles can
be placed on the front side of the shelf.
INFORMATION!
Only store bottles that you intend to open
and serve soon on the inclined front part of
the shelf (a). This will allow any sediment
to settle on the bottom of the bottle,
allowing for decanting.
An accessory drawer with wooden dividers
(14) is installed on extendible rails underneath
the serving shelf.
Inclination serving bottle shelf can be removed
from the appliance along with the accessory
drawer. Take care not to damage the door
gasket. Pull out the shelf from the appliance
as far as possible. Then, lift it at the front side
(1), pull forward (2) and lift at the back (3). To
replace the shelf with the accessory drawer
onto the rails, follow the same procedure in
the reverse order. Fully extend the telescopic
rails and align the grooves (b) on the left- and
right-hand side at the back onto the two hooks
(d). Push the shelf and place it onto the hooks
(c) on the front side of the groove (a).
Publicité
