Publicité
Les langues disponibles
Les langues disponibles
Do not touch the sharp blades – Keep the blade assembly
away from children.
Never remove the mill until the blades have completely
stopped.
The appliance will not work if the mill is incorrectly fitted.
Do not process hot ingredients in the mill allow to cool down
to room temperature before processing.
Mini Chopper/Mill
The processing of spices is not recommended as they may
damage the plastic parts.
Grinding Mill
Do not process dried turmeric root as it is too hard and may
damage the blades.
Slicing/Grating Discs
The discs are very sharp; handle with care when fitting,
removing and cleaning.
Always hold by the finger grip away from the cutting edge
when handling the sharp cutting blades, emptying the bowl
and during cleaning.
Never use your fingers to push food down the feed tube. Only
use the pusher supplied.
Before removing the lid, switch off wait until the cutting disc
has completely stopped.
Cleaning
Wipe the power unit with a damp cloth, then dry. Ensure that
the interlock area
Do not immerse the power unit or blade assemblies in water.
The bowl, lid, pusher and all attachments/tools apart from
the blade assemblies are suitable for both handwashing and
dishwashing.
The blade assemblies should be brushed clean and rinsed
under running water.
Before plugging in
Make sure your electricity supply is the same as the one shown on the underside of your appliance.
This appliance conforms to EC Regulation 1935/2004 on materials and articles intended to come into
contact with food.
Before using for the first time
1
Remove the plastic blade covers from the knife blade. Take care the blades are very sharp. These
covers should be discarded as they are to protect the blade during manufacture and transit only.
2
Wash the parts see 'Care and Cleaning'.
is clear of food debris.
4
Publicité
