Publicité
Les langues disponibles
Les langues disponibles
6. REMOTE CONTROL OPERATION
The supplied remote control performs the function of:
"ON / OFF" switching on and off
"POWER +", "POWER -" power adjustment for a total of 5 power levels.
Always point the remote at the sensor on the unit.
1. POWER:
Press the "ON / OFF" button for 1 or 2 seconds. The green light
(which confirms the electric start) will light up immediately and after
about 2 seconds the appliance will reach the power level
corresponding to the minimum level.
2. POWER adjustment:
By repeatedly pressing the "POWER +" button you can set up to 5
different power levels. The controller LED changes color according to
the scale shown below.
3. OFF:
Press the "ON / OFF" button for 1 or 2 seconds.
THE START OF THE HEATER STARTS IN 2 SECONDS FROM THE IGNITION OF THE GREEN
INDICATOR ON THE REGULATOR. DO NOT EXCEED WITH THE PRESSURE ON THE BUTTONS
OF THE REMOTE CONTROL TO AVOIDTHE EXHAUST OF THE BATTERY. WHEN THE FAILURE
OF THE GREEN INDICATOR HAS FAILED, THIS COULD BE CAUSED BY THE LOW BATTERY
CAUTION
LEVEL OF REMOTE CONTROL.
28
The LED changes color
(Green, Yellow, Orange, Magenta, Red)
according to the set power level.
MIN - 2 - MED - 4 - MAX
Publicité
