Microphone
Turning on/off the microphone
This item allows you to enable (or disable) the microphone for recording sound during video
recording.
Press and hold the Menu button (6) to enter the main menu.
џ
Select the 'Microphone' option
џ
A short press of the Menu button (3) switches Microphone on/off.
PiP Mode
Selection of the Picture in Picture Mode
Press and hold the Menu button (3) to enter the menu.
џ
P IP
Select the 'PiP Mode' option
џ
PIP
A short press of the Menu button (3) switches the mode on/off.
џ
Icon
Adjusting icon brightness.
brightness
Press and hold the Menu button (3) to enter the menu.
џ
Select the 'Icon Brightness' option.
џ
A short press of the Menu button (3) opens the submenu.
џ
Select the brightness level of the pictograms with the UP (4) / DOWN (2) buttons.
џ
A short press of the Menu button (3) confirms the selection.
џ
General Settings
.
This menu item allows you to program the following settings
Language
Choose Language
Enter the 'Language' submenu with a short press of the Menu button (3).
џ
Select one of the available interface languages (English, French, German, Spanish or
џ
Russian) with the UP (4) / DOWN (2) buttons.
Confirm your selection with a short press of the Menu button (3).
џ
To save your choice and exit the submenu, press and hold down the Menu button (3).
џ
Date
Setting the Date
Enter the 'Date' submenu with a short press of the Menu button (3). The date appears in
џ
dd/mm/yyyy format.
Set the required year, month and day with the UP (4) / DOWN (2) buttons. Press the Menu
џ
button (3) to move through the digits.
To save your chosen date and exit the submenu, press and hold down the Menu button (3).
џ
Time
Setting the Time
Enter the 'Time' submenu with a short press of the Menu button (3).
џ
Select the time format (24-hour clock or AM/PM) by pressing the UP (4) / DOWN (2) buttons.
џ
Press the Menu button (3) to move to the hour setting.
џ
Set the hour by pressing the UP (4) / DOWN (2) buttons.
џ
Press the Menu button (3) to move to the minute setting.
џ
Set the minute by pressing the UP (4) / DOWN (2) buttons.
џ
To save your chosen time and exit the submenu, press and hold down the Menu button (3).
џ
Units of
Selecting a unit of measure
measure
Enter the 'Unit of measure' submenu with a short press of the Menu button (3).
џ
Set the unit of measurement (metres or yards) by pressing the UP (4) / DOWN (2) buttons;
џ
M
Y
then press the Мenu button (3) .
Return to the submenu occurs automatically.
џ
www.tulon.ru
M
Y
Default
Restore Factory Settings
Settings
Enter the 'Default Settings' submenu with a short press of the Menu button (3).
џ
Select the 'YES' option to reset to factory settings or 'NO' to cancel with the UP (4) / DOWN (2)
џ
buttons.
Confirm your selection with a short press of the Menu button (3).
џ
If the YES option has been selected, the message 'Do you want to return to default settings?'
џ
will appear together with options YES and NO. Select YES to format the memory card.
If the NO option has been selected, formatting will be cancelled and the submenu will
џ
reappear.
The following settings will be restored to their factory state before being set by the user:
Operating mode – video. Mode – forest. Calibration mode – automatic. Language – English.
Wi-Fi – off (default password). Magnification – original value. PiP – off. Colour palette – White
Hot. Unit of measurement – metres.
Note: When resetting to factory settings the date/time settings and the user pixel map are
saved.
Formatting the
This function enables the device's Flash Card (memory card) to be formatted (all files to be
Memory Card
deleted from its memory).
Enter the 'Memory Card Formatting' submenu with a short press of the Menu button (3).
џ
Select the 'YES' option to reset to format the memory card or 'NO' to return to the submenu
џ
with the UP (4) / DOWN (2) buttons.
Confirm your selection with a short press of the Menu button (3).
џ
If the YES option has been selected, the message 'Format the Memory Card?' will appear
џ
together with options 'YES' and 'NO'. Select YES to format the memory card.
The message 'Formatting memory card' means that formatting is in progress.
џ
The message 'Formatting completed' means that formatting is completed.
џ
If the NO option has been selected, formatting will be cancelled and the submenu will
џ
reappear.
Wi-Fi Settings
This option enables you to configure the device to operate on a Wi-Fi network.
Turn on/off Wi-Fi
Press and hold the Menu button (3) to enter the main menu.
џ
Select the "Wi-Fi activation" option
џ
A short press of the Menu button (3) switches Wi-Fi on/off.
џ
Setting
This function enables you to set a password to access the device from an external device. This
a password
password is used when linking an external device (e.g. a smartphone) to the device.
Press the Menu button (3) to enter the 'Wi-Fi settings' submenu.
џ
The default password (12345678) will appear on the screen.
џ
Set your desired password with the UP (4) / DOWN (2) buttons. The UP (4) button increases
џ
the number and the DOWN (2) button reduces the numbers. Press the Menu button (3) to move
through the digits.
To save the password and exit the submenu, press and hold down the Menu button (3).
џ
This sub-function enables you to configure the appropriate level of access to your device
Setting
made available to the Stream Vision app.
Access Levels
Owner level. A Stream Vision user has full access to all the device's functions.
Guest level. A Stream Vision user is able to view video footage from the device only in real
time.
Removal of
When using the device, defective (broken) pixels may appear on the sensor: i.e. bright or dark
Defective Pixels
points of constant brightness that are visible on the image. AXION thermal imagers offer the
possibility of removing any defective pixels on the sensor programmatically, as well as to
cancel any deletion.
5