Abus IPCS29511 Manuel D'instructions page 124

Now select a day of the week for the recording to take place. To store particular time periods, enter a start
and end time. To activate the alarm input all day, select 00:00 as the start time and 24:00 as the end time.
To apply the settings for all days of the week, click the "Select All" checkbox. To copy the settings to other
days of the week, select the day of the week and click on "Copy".
Under Record Type, select the recording mode for the desired schedule. You can
choose between the following record types:
Normal: Continuous recording
Motion detection: motion-triggered recording.
Motion detection | Alarm: recording triggered by motion or by alarm input. Camera begins recording either
following motion detection or an alarm input.
Motion detection & Alarm: recording triggered by motion and by alarm input. Camera only starts recording if
motion and alarm input are triggered simultaneously.
Please note that the alarm input is only available in certain models.
To apply the changes, click "OK" and to discard them click "Cancel".
Please note:
When recording to MicroSD card, only channel 1 (fisheye view) is recorded. This can then be
played back via the camera's playback window.
125