Télécharger Imprimer la page

Abus IPCS29511 Manuel D'instructions page 99

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 132
8.3.3 PPPoE
Enable PPPoE: Check this box to enable this function
Dynamic IP:
User name:
Password:
Confirm:
8.3.4 Port
If you wish to enable external access to the Speed Dome, the following ports must be configured.
HTTP Port
The default port for HTTP transmission is 80. As an alternative, this port can be assigned a value in the range
1024~65535. If several Speed Domes are connected in the same subnetwork, each camera should be given
a unique HTTP port of its own.
RTSP port
The default port for RTSP transmission is 554. As an alternative, this port can be assigned a value in the
range 1024~65535. If several Speed Domes are connected in the same subnetwork, each camera should be
given a unique RTSP port of its own.
HTTPS Port
The standard port for HTTPS transmission is 443.
SDK port (control port)
The standard port for SDK transmission is 8000. Communication port for internal data. As an alternative, this
port can be assigned a value in the range 1025 ~ 65535. If several IP cameras are located in the same
subnetwork, each camera should have its own unique server port.
Apply the settings by clicking "Save".
The IP address is automatically determined
User name of the service provider
Password for access
Password confirmation
100

Publicité

loading