Télécharger Imprimer la page

Nakayama PRO PC4100 Mode D'emploi page 12

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
EN
Troubleshooting
Case 1. Starting failure
Make sure the icing prevention system is not working.
Check fuel for water or substandard mixture.
Check for engine flooding.
Check the spark.
Case 2. Lack of power / Poor acceleration / Rough idling.
Check fuel for water or substandard mixture.
Check air filter and fuel filter for clogging.
Check carburettor for inadequate adjustment.
Case 3. Oil does not come out
Check oil for substandard quality.
Check oil passage and ports for clogging
When your unit seems to need further service, please consult with our service shop in your area.
Technical Data
Model:
PC4100 PC4610
Displacement:
39,6cc
Power:
2hp
Bar Length:
40cm
3/8 LP,
Chain:
1,3mm
12
PC5610
* The manufacturer reserves the right to make minor changes to product design and technical specifications
without prior notice unless these changes significantly affect the performance and safety of the products. The parts
45,6cc
54,5cc
described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the
manufacturer's product line with similar features and may not be included in the product you just acquired.
2.4hp
3.5hp
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or
replacement work, including maintenance and special adjustments, must only be carried out by technicians of the
45cm
50cm
authorized service department of the manufacturer.
0,325''
* Always use the product with the supplied equipment. Operation of the product with non-provided equipment
0,325''
1,5mm
may cause malfunctions or even serious injury or death. The manufacturer and the importer shall not be liable for
1,3mm
injuries and damages resulting from the use of non-conforming equipment.
(78 links)
WWW.NIKOLAOUTOOLS.COM
Replace with proper fuel.
Remove and dry the spark plug.
Then pull the starter again with no choke.
Replace with a new plug.
Replace with proper fuel.
Clean.
Replace speed needles.
Replace.
Clean.

Publicité

loading

Ce manuel est également adapté pour:

Pro pc4610Pro pc5610Pro 036456Pro 036463Pro 036470