FAFREES F26 Pro Manuel D'utilisation page 9

assistance, or lighting functions abnormally, intermittently, or not working,
please discontinue the use of your ebike immediately and contact the
Fafrees Support team for assistance.
Brakes
Ensure that the brakes and their system components are free from
damage, properly secured and working correctly. When fully squeezed,
both front and rear brake levers should not be touching the handlebar. Take
your bike to a certified, reputable bike mechanic to have the brakes
repaired if you find a problem.
Tires and Wheels
Your wheels should always spin straight and must be repaired or replaced
if they wobble side to side or up and down when spinning. If your wheels
become untrue or spokes loosen, which can happen with normal use, we
recommend that a certified, reputable bike mechanic performs all wheel
tuning and truing operations on your bike. Do not attempt to true wheels or
tighten spokes unless you have adequate knowledge, tools, and
experience. Ensure the tires and inner tubes are in good working condition
without any visual damage and have the correct amount of air pressure as
stated on the tire. Always replace tires and inner tubes with punctures, cuts,
or damage before you ride. Tires without the correct amount of air pressure
can reduce performance, increase tire and component wear, and make
riding your bike unsafe.
Accessories, Straps, and Hardware
Ensure all hardware is secured and all approved accessories are properly
attached per the specific component manufacturer s instructions. It is good
practice to look over all hardware, straps, and accessories before each ride
and if you do discover something wrong or something that you are not sure
about, have it checked by a certified, reputable bike mechanic.
Suspension, Handlebar, Grips, and Seat Adjustments
The suspension fork on your ebike will affect the handling of your bike so
you must understand how it works before use. The suspension fork should
be properly adjusted according to your weight and terrain. Ensure the
handlebar and handlebar stem are properly aligned, fitted to the user, and
secured to their recommended torque values. Handlebar grips should not
move easily on the handlebar end. Loose, worn, or damaged handlebar
grips should be replaced before you ride. The seat and seatpost should be
properly aligned, fitted to the user, and the seatpost quick release should
be properly tightened, fully closed, and secured before riding.
EN 06