FAFREES F26 Pro Manuel D'utilisation page 8

mechanic complete these procedures as well as any future adjustments or
tuning.
NOTICE: A critical aspect of assembling your bike is securing the front
wheel and checking the tightness of the rear wheel axle nuts. These
mounting mechanisms may become loose or unsecured during shipment
or over time. The torque and security of all wheel mounting hardware
should be inspected upon arrival and on a regular basis. Both wheels need
to be properly secured before operating your bike.
Mandatory Equipment and Use Locations
Before riding, ensure you have all required and recommended safety
equipment and are following all laws pertaining to use an electric bike in
your region. For example, these laws may specify the need for mandatory
equipment, use of hand signals, and where you can ride.
Changing Components or Attaching Accessories
The use of non-original components or spare parts can jeopardize the
safety of your ebike, void your warranty and, in some cases, cause your
ebike to not conform with laws pertaining to your bike.
The replacement of original components or installation of
third-party accessories or accessories not from Fafrees
explicitly recommended for your bike model is at your own
risk. Using aftermarket accessories or components that have
not been tested by Fafrees for safety and compatibility may
void your warranty, create an unsafe riding condition,
damage property or your bike, or result in serious injury or
death.
Safety Check Before Each Ride
Always check the condition of your bike before you ride in addition to
having regular maintenance performed. If you are unsure of how to
conduct a complete check of the condition of your bike before every ride,
you should consult a certified, reputable bike mechanic for assistance.
Electrical System
The electric system [powers several components on your ebike. It is critical
that you familiarize yourself with all aspects of your ebike's electrical
system and check to see if it is working correctly before every ride. The
front and rear brake levers contain safety power cutoff switches, which
disable the hub motor's assistance when applied. Both levers should be
checked for correct operation. If the brake lever cutoff switches, pedal
EN 05