FAFREES F26 Pro Manuel D'utilisation page 21

Step 8: Wheel reflectors Installation.
Place the wheel reflector between the spokes, press the clip into the hole,
and use a screwdriver to rotate the clip to lock position.
Step 9: Inflate tires.
Check that the tire beads and tires are evenly seated on the rims. Use a
pump with a Schrader valve to inflate each tire to the recommended
pressure indicated on the tire. Do not overinflated or underinflate tires.
BATTERY CHARGING
Charging procedure
Follow these steps for charging your ebike battery from Fafrees Bikes:
1. Ensure the battery is off.
2. Remove the rubber cover on the charging port.
3. Plug the charger into the battery ' s charging port, BEFORE
PLUGGING CHARGER INTO POWER OUTLET.
5. Unplug the charger from the outlet, then the charging port: Once fully
charged, indicated by the charging indicator light turning green, unplug the
With the battery on or off the bike, place the charger
in a flat, secure place, and connect the DC output
plug from the charger to the charging port on the side
of the battery.
4. Plug the charger into a power outlet: Connect
the charger input plug (110/240-volt plug) to the
power outlet. Charging should initiate and will be
indicated by the LED charge status light on the
charger illuminating as red light.
EN 18