FAFREES F26 Pro Manuel D'utilisation page 19

Step 5: Pedal installation.
Note the markings on the pedal screws and on the crank arms. Stamp with
"L" is the left pedal, stamp with "R" is the right pedal, the right pedal is
installed on the side of the sprocket.
NOTE: The right pedal (pedal with "R" sticker label) is threaded so that it is
tightened by turning clockwise. The left pedal (pedal with "L" sticker label)
is reverse-threaded and tightens counterclockwise.
Step 6: Display installation.
A. After the handlebar is installed, take out the display from the accessory
box. For the convenience of installation, one of the tube clips of the dispaly
can be completely removed first. Gently open one of the tube clips and
clamp onto the handlebar. And then clamp another tube clip onto the
handlebar.
EN 16