FAFREES F26 Pro Manuel D'utilisation page 30

Electrical
Cables
Accessories
TROUBLE SHOOTING
Symptoms
The bike can't
be powered on
Irregular
acceleration
and/or reduced
top speed
Examine connectors to ensure that they are completely
seated and dry of any debris or moisture.
Inspect the cables and cable housing.
Make sure the brake, tail, and headlights are all adjusted
correctly, working, and not blocked.
Make sure that every reflector is fitted correctly and isn't
covered up.
Make sure that the bike's other components are securely
fastened and working as intended.
Check the safety equipment, including the helmet.
Make sure the mounting gear is securely fastened if the
vehicle has a front rack, rear rack, basket, etc.
Make sure the taillight and the power cable are securely
fastened if the vehicle has a rear rack.
Make sure the fender mounting hardware is securely
fastened if the vehicle has fenders.
Make sure that the fenders are free of cracks and holes.
Possible Causes
1. Insufficient battery
power
2. Faulty connections
3. Battery not fully
seated in tray
4. Improper turn on
sequence
5. Brakes are applied
1. Insufficient battery
power
2. Loose or damaged
throttle
3. Misaligned or
damaged magnet ring
Most Common Solutions
1. Charge the battery
2. Clean and repair
connectors
3. Install battery correctly
4. Turn on bike with proper
sequence
5. Disengage brakes
1. Charge or replace
battery
2. Replace throttle
3. Align or replace magnet
ring
EN 27