FAFREES F26 Pro Manuel D'utilisation page 17

Step 3: Handlebar installation.
C.Place the front wheel on the front fork for
installation, pay attention to the disc brake
pad and the disc brake to match in place.
D.Open the accessory box,
take out the quick release
skewer lever, and loosen the
screw from the lever.
E.Insert
skewer lever into the front axle
core, tighten the screw, then
press the quick release handle
to lock the front fork.
A.After the front wheel is installed,
remove all the protective foams, and
then place the bicycle as shown.
EN 14
the quick release