Seko 43651 Manuel D'installation page 4

1. DESCRIPTION
1 Testata
2 Meccanismo
3 Regolazione
4 Motore
The metering pump is a reciprocating positive displacement pump; basic components are: the prime mover, the
gearbox, the mechanism, the stroke length adjustment and the liquid end .
 THE DESIGN OF THE METERING PUMP FULFILLS ITALIAN SAFETY AND ACCIDENT PREVENTION
REGULATIONS.
 PRODUCT INTENDED FOR PROFESSIONAL USE, BY SKILLED PEOPLE.
Safety instructions
WARNING
Exceeding the maximum allowed operating pressure must be prevented
(e.g. by using a pressure relief valve)
Before starting to work on the metering pump verify carefully the following:
• the drive is disconnected from the power source
• parts such as pumphead and piping are depressurized
• parts in contact with aggressive substances are washed before handling
• personnel protection is carried out according to local regulations
1.1 Applications
Metering pump is a process component capable to transfer defined volumes of liquid with high accuracy, moreover
it is possible to vary the flow rate by acting on integral devices.
To obtain the bestperformances, select the pump considering the duty required and the conpatibility of the construc-
tion materials of the contact parts.
Before using a pump for a duty different from the original one, please contact our Technical Dept. for information.
SPR0136001
Cabeza Pump head
Mecanismo Mechanism
Regulaciòn Adjustment
Motor Motor
Rev. 5.2
Tête
Mecanisme
Régulation
Moteur
EN
Pumpenkopf
Triebwerk
Hubeinstellung
Motor
2