Publicité
Les langues disponibles
Les langues disponibles
Adjust the position of the refrigerator leaving a space of 6
mm between the inside wall of the cabinet and the outside
walls of the refrigerator. Secure the watches to the horizontal
frame using the screws.
4. Place the gasket in the opening (about 10mm) between
the lower front frame and the bottom of the cabinet. Secure
the lower brackets (3) to the lower front frame with the
screws (2). Secure the lower brackets to the bottom of the
cabinet using the screws (2).
5. Position the gaskets correctly in the refrigerator
openings on the left, top and right.
6. Secure the door to the brackets (4) (one for each position
at the top and bottom) with the screws (2). Close the
refrigerator and cabinet doors, then open them fully and
mount the connection plate (5) on the corresponding
support, fixing it to the cabinet door. The space " ✝" between
the connection plate and the edge of the cabinet is equal to
the thickness of the outside panel of the cabinet,
approximately 20mm. Adjust the connection element so
that the handle side of the cabinet door does not come into
contact with the body of the appli a nce when it is closed
(space of approx. 1 mm for large appli-ances). Fit the second
eventual door connection element.
7. Close the hole in the appliance door with the plug.
Figure 2
- 9 -
Publicité
