SICK G20 Notice D'instructions page 41

10 Technical data
10.1 Technical specifications
The "Technical Data" chapter contains only an extract of the technical data of the sensor.
The complete technical data can be found on the homepage
Features
Sensing range
Min. sensing range
Maximum distance range from reflector to sensor (operating reserve 1)
Recommended distance range from reflector to sensor (operating reserve 2)
Reference reflector
Emitted beam
Light sender
Type of light
Light spot size / distance
Electrical data
Supply voltage U
B
Ripple
Current consumption
Protection class
Limit values
1)
Reverse polarity protected U
B
2) Limit values
8026844.1K1V/2024-02-08 | SICK
Subject to change without notice
Cleaning
NOTICE
Equipment damage due to improper cleaning.
Improper cleaning may result in equipment damage.
Only use recommended cleaning agents and tools.
■
Never use sharp objects for cleaning.
■
Clean the optical surfaces at regular intervals and, in the event of contamination,
►
with a lint-free lens cloth (part number 4003353). The cleaning interval essentially
depends on the ambient conditions.
No modifications may be made to devices.
Subject to change without notice. Specified product properties and technical data are
not written guarantees.
connections
OPERATING INSTRUCTIONS
www.sick.com under the part number of the sensor.
DC
10 ... 30 V DC 1)
< 5 Vpp
≤ 30 mA, without load.
At U = 24 V
B
III
O P E R A T I N G I N S T R U C T I O N S | GLD20
GLD20
0.03 m
0.03 ... 20 m
0.03 m ... 16 m
PL80A
GLD20
LED
Visible red light
200 mm / 5 m
AC/DC
21.6 ... 253 V AC/DC 2)
< 10 %
≤ 45 mA, 24 V AC/DC
≤ 10 mA, 230 V AC/DC
II
en
41