Before You Start; Packing List; Assembly - Shindaiwa F226S Manuel D'utilisation

Packing list

 The following parts are packed separately in the packing box.
 When you have unpacked the box, please check the parts that it contains.
 Contact your dealer if anything is missing or broken.
1. Engine and shaft tube
2. Wing nut
3. Washer
4. Bolt
5. Shield
6. Nylon line cutting head

Assembly

 Read the operator's manual carefully to ensure that you assemble the product correctly.
Using a product that has been incorrectly assembled could lead to an accident or serious injury.
Loop handle assembly

Before you start

7. Operator's manual
8. Loop handle
9. Locking tool
10. Socket wrench
11. L-wrench
WARNING
Position handle (A) in comfortable operating position and tighten
screws (M5×35) (B). The cutting attachment should be 5 - 7.5 cm
above the ground and as level as possible.
9
Before you start