Eurocave PURE Mode D'emploi page 42

6/ USING YOUR WINE CABINET FOR THE FIRST TIME
VI. Relative humidity level display (1-temperature model only)
Your wine cabinet has a function for measuring humidity levels, allowing
you to see the level of relative humidity inside the appliance, when the
setting is 9 - 15° C.
The ideal level of humidity is above 50% and ideally between 60 and 75 %.
VII. Setting the lighting mode
1
Press the key.
The indicator of the active mode will flash
There are 3 setting options for lighting:
Permanent lighting (mood lighting for a cabinet fitted with a glass
door, for example).
Lighting which comes on when the door opens (it is switched off
when the cabinet door is closed).
Lighting disabled
VIII. Charcoal filter meter display
When using the filter for the first time or replacing it, set the meter to 365.
1
Press the key.
The display will flash.
3
Press the to confirm
The alarm display will switch off
20
GB
If you want to increase the level of relative humidity in your cabinet, pour
the equivalent of one glass of water into the duct of the tray located on
the bottom right-hand side of the cabinet.
2
Press the or keys to select the desired mode.
3
Press the key to confirm
Precaution : bright light, never look directly at the LED beam.
Replacement of the LEDs on the control panel
must only be carried out by a qualified electrician.
2
Press the key to set to 365.
You can consult the meter by pressing the key.