Eurocave PURE Mode D'emploi page 32

7
7
Unscrew the two screws and the door catch.
Unscrew the two screws on the opposite side and remove the two
washers.
8
Mount the door catch on the desired opening side, using screws.
Replace the washers, then the screws, on the side opposite the door catch.
9
Turn the door through 180°.
Warning: the door is very heavy.
precautions to ensure that you do not injure yourself or drop it.
10
Put the door back on its pin.
11
Put in place the upper hinge.
12
Screw the hinge so that the door is completely parallel to the cabinet.
Check that the door seal adheres well to the cabinet (by closing the door),
to ensure that it is completely air-tight.
13
Put in place the caps.
10
GB
4/ INSTALLING YOUR WINE CABINET
8
Poignée
Take any necessary
13
12
11
14
14
As the door has turned 180 degrees, reposition your handle above
Côté face
the lock (Full Glass and Black Piano doors only): Unscrew the six
screws placed on the side of the door, using the Allen wrench (2,5 avant
mm), which you will find in the handle's box.
View from above
15
Handle
Front
15
Position the handle on the specially designed groove on the door
frame. Insert the handle all the way into the groove using a forward
movement.
16
Screw the six screws back on. Take care not to catch the seal when
screwing.
Vue du dessus
Lock
Joint
Cadre de porte
Seal
Door frame
16