Eurocave PURE Mode D'emploi page 37

III. Adding or changing the position of a storage shelf (AXUH/AXUH2)
a.
b.
Note: to install a storage shelf the back section of which rests on the ledge, located at the back of the cabinet, fit 2 rack support pins at
the front to support the front section of the shelf (pins supplied in the accessories bag).
The same applies if you place a storage shelf just above the stiffener, position two rack support pins at the back of the cabinet (for large
models only).
IV. Assembly and use of shelf labels
The shelf labels in epoxy coated steel allow you to identify your bottles and locate
them easily. White marker pen supplied in the accessories bag (erasable).
b.
5/ LAYOUT – STORAGE
c.
(supplied with ACMS2 and AXUH2 shelves)
c.
1
d.
1
back
2
wall
2
15
GB