Publicité
Les langues disponibles
Les langues disponibles
6/ USING YOUR WINE CABINET FOR THE FIRST TIME
1. Connecting and starting up
- Fuse of 10A for one unit, 15A for two and 25A for three;
- Use of multi-socket plugs is not recommended if it does not respect
above electrical data as well;
After waiting 48 hours, switch on your wine cabinet by pressing and
holding down the
button for 5 seconds.
II-A. Description (1-Temperature model V-INSP-S, V-INSP-M, V-INSP-L)
A
B
C
D
E F
SET
A
Standby on/off key
B
Confirmation and access to menu functions key
C
Lighting mode
D
Temperature display
E
Level of relative humidity display
F
Humidity level alarm (if flashing)
II-B. Temperature setting
SET
3 sec.
1
Press and hold down the
.key for approximately
3 seconds.
SET
2
Select the desired temperature setting (°C or °F)
by pressing the
or
key.
The value shown on the display is the cabinet's actual
temperature, you must therefore wait for your new setting to
take effect.
26
GB
Please note: LEDs in the control panel must only be
replaced by a qualified electrician.
I
G
H
J
The touch controls are very sensitive.
There is no need to apply force, a
light touch is sufficient to register the
command. Remember to remove your
finger from the control panel between
each press. A quiet beep confirms the
press.
L
K
G
Open door indicator
H
Charcoal filter alarm
I
Heater status light
J
Setting and selection keys
K
Compressor status light
L
Warning light
The default setting is 12 °C (ideal maturing temperature). However, the
•
temperature can be set between 5 and 20 °C.
•
Recommended temperature range for wine maturing: 11 - 13 °C.
N.B.: to operate correctly, your cabinet must be placed in a room with a
temperature of 12 - 35 °C.
6/ USING YOUR WINE CABINET FOR THE FIRST TIME
SET
3
Press the
button to enter the temperature
setting function.
SET
4
Press the
or
keys to set the
temperature.
III-A. Description (Multi-temperatures model S-INSP-S)
A
B
C
D
E
F
SET
A
Standby on/off key
B
Confirmation and access to menu functions key
C
Lighting mode
D
Display showing the lowest temperature reached by
the wine cabinet
E
Display showing the highest temperature reached by
the wine cabinet
III-B. Temperatures setting
Recommended temperature setting range for the lowest temperature: 7 - 9 °C / 45 - 48 °F. Recommended temperature setting range for the highest
temperature: 17 - 20 °C / 63- 68 °F.
SET
3 sec.
1
Press and hold down the
key for approximately
6
3 seconds.
SET
2
Select the desired temperature setting (°C or °F) by
pressing the
or
key.
SET
3
Press the
button to enter the temperature
setting function.
SET
5
Press the
button to confirm.
J
G
H
I
The touch controls are very sensitive.
There is no need to apply force, a
light touch is sufficient to register the
command. Remember to remove your
finger from the control panel between
each press. A quiet beep confirms the
press.
L
K
F
Open door indicator
G
Charcoal filter alarm
H
Heater status light
I
Setting and selection keys
J
Compressor status light
K
Warning light
SET
4
Press buttons
or
to adjust the lowest
temperature of the wine cabinet.
5
SET
5
Press button
to confirm and adjust the
highest temperature setting for the wine cabinet.
6
SET
6
Press buttons
or
to adjust the setpoint.
27
GB
Publicité
