Publicité
Les langues disponibles
Les langues disponibles
4/ INSTALLING YOUR WINE CABINET
T25 (not supplied)
4
4
x2
x2
4
4
x2
x2
We recommended that you carry out the following procedure with 2 people. Carry out the procedure in an environment which will not cause
damage to the appliance. Ideally use an area with a protective cover.
5
180°
8
9
8
9
T25 (not supplied)
In the case of a technical solid door, remove the plastic cap before retightening the door stop. The door stop is essential because it plays the role
20
of mechanical stop and also lighting and door sensor. Retain the plastic cap in case you want to reverse your door again in the future.
GB
1
2
3
4
3
4
7
6
10
12
11
13
10
11
T25 (not supplied)
2.5 (not supplied)
4/ INSTALLING YOUR WINE CABINET
2.5 (not supplied)
When reversing the door catch, the screws with washers must be placed on the opposite side of the door catch.
Adjusting the hinges
If the door is not level, it is possible to adjust it using the upper hinge.
If adjusting using the upper hinge is not sufficient, proceed in the same way with the lower hinge. For more accurate adjustment, adjust with both hinges at
the same time.
T20 (not supplied)
1
1
2
pz1 (not supplied)
180°
180°
Plug in and restart your wine cabinet. Push your cabinet into its initial position then screw down the filler strips. (See Chap I § 3).
15
14
2
3
21
GB
Publicité
