Publicité
Les langues disponibles
Les langues disponibles
4/ INSTALLING YOUR WINE CABINET
Precautions (continued)
For single-temperature models only:
- If you notice low humidity levels (<55%) a few days after setting your wine
cabinet into operation, we recommend that you use the humidity cartridge,
supplied in a bag with the appliance. Place it at the bottom of the cabinet,
under the rack in the drip tray provided (see diagram below). When using
for the first time, completely immerse your cartridge in tap water for a few
minutes to saturate it then allow it to dry. Depending on external conditions,
it may be necessary to add a 10cl glass of water after several months.
Place the charcoal filter, which you will find in the "accessories" box, inside
your cabinet, in the breather hole located on the top left-hand side (see
diagram below).
Direction of air flow
•
Never obstruct the two air vents at the front
I. Built-in between two kitchen units
A Small model foot 89/125 mm
(already assembled on the cabinet when delivered)
B Medium-sized model foot 100/160 mm
C Large model foot 138/175 mm
D Countersunk screw Ø 2.5x12*
E Countersunk screw Ø 2.5x25*
F Handle filler strip
G Hinge filler strip
8
GB
H Filler strip support fitting
Dimensions to observe for a full glass, glass and stainless steel, technical solid or technical glass door:
•
For setting the height of the feet, you have a choice of 3 feet
(see chap 4 §1).
139 - 175
100 - 160
x4
Installation
Move your cabinet to the desired location. This must:
Not be too damp. Max 85% ambient humidity (linen cupboard, laundry
•
room, bathroom...).,
•
Have a flat, stable floor.
•
Wait 48 hrs before switching on the cabinet.
•
When the appliance comes into use for the first time, the charcoal filter
alarm will display. Reset the filter meter to 365 (see chapter 6).
Door security
In order to secure your cabinet, the full glass and glass with stainless steel
doors have a lock.
The bottles must be arranged so that they do not come into
contact with the back wall. If this occurs, the condensation
created on the wall may drip onto the shelves and damage the
bottle labels. Besides, contact with the cold wall can create a frost point,
which is harmful to your wine.
4X
4X
4X
10X
4X
1X
D
F
A
B
C
E
600
x4
820 - 890
Size S
600
600 mini
557
Size M
Built-in installation assembly
Precautions
•
Setting and assembling must be carried out before flush-fitting the appliance in its chosen location.
•
Assembling the filler strips is compulsory. They are an integral part of the cabinet body and ensure that it functions correctly.
1. Unscrewing the filler strips
pz1 (not supplied)
1X
2X
G
H
2. Adjusting the lower front
T25 (not supplied)
* screws supplied
4/ INSTALLING YOUR WINE CABINET
600 mini
557
597
600
557
720
810
89 - 125
594*
557
597
1320 - 1390
Size L
1230
1320
89 - 125
594*
1
1
2
557
597
600 mini
1820 - 1890
1730
1820
557
89 - 125
594*
* with filler strips
2
3
9
GB
Publicité
