Publicité
Les langues disponibles
Les langues disponibles
5/ LAYOUT – STORAGE
d.
Slide the shelf until the rear shelf fasteners are fully locked into the
spaces provided in the runners.
f.
2
1
N.B. : to prevent the shelf from tipping, ensure that the lugs on each side of the shelf are pushed all the way into the holes,
before pushing the shelf.
II. Adjusting the Main du Sommelier support at the front of the sliding
shelf
Depending on the shape and height of a bottle, you may have to move the Main du Sommelier support, located at the front of the shelf.
pz2 (not supplied)
1
3
24
GB
e.
Then slot the front lugs of the shelf in the spaces provided in the
front part of the runners. It is necessary to jiggle the shelf in order
to lodge the lugs in the holes. Start by inserting the left lug. The
right-hand one will then naturally slot inside the oblong hole.
g.
2
1
2
4
5
5/ LAYOUT – STORAGE
III. Adding or changing the position of a storage shelf
a.
b.
c.
Comment: To install a storage shelf the back of which rests on the ledge located at the bottom of the cabinet, place two support pins
at the front, to support the front section of the shelf (supplied in the accessories box).
IV. Assembling and using the shelf labels
The epoxy-coated steel shelf labels allow you to identify your bottles and locate
them easily. White marker pen supplied in the accessories box (erasable).
1
2
d.
1
Back
wall
2
c.
25
GB
Publicité
