Publicité
Les langues disponibles
Les langues disponibles
4/ INSTALLING YOUR WINE CABINET
II. Flush-fitting in a kitchen unit carcass
A Small model foot 89/125 mn
B Medium-sized model foot 100/160 mn
C Large model foot 138/175 mn
D Countersunk screw Ø 3x16*
E Countersunk screw Ø 3x25*
F Handle filler strip
G Hinge filler strip
Dimensions to be observed for a technical glass, technical solid, stainless steel and glass or full glass door:
Int. 560
600 mini
557
1320 mini
1270 mini
1320
Size M
89 - 125
594*
12
* with filler strips
GB
10X
4X
1X
4X
4X
4X
D
E
F
B
C
A
2X
2X
I
J
H Filler strip support fitting
I Securing tab (only for glass, solid or
technical doors)
J Securing tab (only for glass, solid or
technical doors)
600 mini
Int. 560
810 mini
760 mini
597
810
Size S
1270
89 - 125
Int. 560
557
597
600 mini
1820 mini
1770 mini
1820
Size L
89 - 125
594*
Flush-fitted installation assembly
Precautions
1X
2X
•
H
Adjusting and assembling must be carried out before the appliance is flush-fitted its chosen location.
G
•
Assembling the filler strips is compulsory. They are an integral part of the cabinet body and ensure that it functions correctly.
1. Unscrewing the filler strips
pz1 (not supplied)
* screws supplied
2. Adjusting the lower front
When delivered, the lower front of your cabinet is already configured for a built-in installation (front aligned with the door). There is no need for additional
adjustment.
3. Assembling the filler strips
pz1 (not supplied)
557
597
760
594*
Particularity of built-in cabinet installation, with a technical glass door or technical solid door finish:
Assembly is not the same depending on the type of door selected. Specific requirement for technical solid doors and technical glass doors.
The filler strip must be replaced by securing tabs.
1770
4/ INSTALLING YOUR WINE CABINET
2
1
1
2
13
GB
Publicité
