Sentiotec WC4-B-TC2 Mode D'emploi page 29

6 Electrical connection – only for experts
Also heed the instructions in the operating and installation instructions of the power elements used.
6.1 Rear view wave.com4 touch
The individual modules are connected to one another via the
6-pin RJ12 cable.
The bus cable is inserted into jack A at the operating element.
See also block wiring diagrams.
The loudspeakers are connected via terminal block C.
6.2 Connection of loudspeaker and terminal assignments
LSL+ Loudspeaker left +
LSL- Loudspeaker left –
LSR+ Loudspeaker right +
LSR- Loudspeaker right –
When the sound & light is used with the wave.com4 touch,
the loudspeakers can be connected to the wave.com4 touch
(terminal block C).
Use of the MP3 player integrated into the sound & light (connection of the loudspeaker of the colour lamp to the
power element of the S&L in accordance with the S&L operating instructions) and the amplifi er is possible
(can be selected in the system menu).
LSL+ Loudspeaker left +
LSL- Loudspeaker left –
LSR+ Loudspeaker right +
LSR- Loudspeaker right –
Switch B is currently not in use and reserved for subsequent applications.
WORLD OF WELLNESS
Instructions for installation and use – only for experts
brown
blue
grey
black
A
rear view
terminal block C
P. 7/22
B
C C
EN