Motorola Solutions PMLN8305 Manuel D'installation Et D'utilisation page 25

Chapter 4
Troubleshooting
This section provides typical malfunctions that can occur during the operation of the PMLN8307,
PMLN8308, PMLN8309, and PMLN8310 Vehicular Cradle Kits and corrective actions.
Prior to troubleshooting the malfunction, verify the following:
• Your MXP600 radio functions properly outside the cradle.
• The cable to the cradle is properly connected.
Identify the malfunction in accordance to the troubleshooting table. If the malfunction does not appear
in the table, refer to your Service Provider.
Follow the steps in the troubleshooting table after inserting the radio into the cradle and turning the
ignition switch to ON.
Table 2: Troubleshooting
Malfunction
Indication of charging on the radio display
does not exist.
Charging indication does not exist.
Corrective Action
1 Remove the radio from the cradle and install
again.
2 If the malfunction persists, refer to your Serv-
ice Provider.
1 Verify that the ignition switch is in On position.
2 Remove the radio from the cradle and install
again.
3 If the malfunction persists, refer to your Serv-
ice Provider.
MN007820A01-AC
Troubleshooting
25