Motorola Solutions PMLN8305 Manuel D'installation Et D'utilisation page 14

MN007820A01-AC
Chapter 2 : Installation Procedures
2.1.2
Installing PMLN8307 and PMLN8308
Figure 4: Installing the Vehicular Power Module onto the cradle
1
2
3
4
Perform the following steps when installing the PMLN8307 and PMLN8308 Vehicular Cradle with
Vehicular Power Adaptor Kit.
Procedure:
1 Place the NNTN8040 or PMLN7825A Vehicular Power Adaptor on the holder adaptor.
2 Push the adaptor holder top to engage onto the adaptor holder bottom.
3 Secure the adaptor holder onto the bottom of the cradle pocket by screwing the jack screws into
the insert nuts.
14
1
4
3
Insert Nut (x2)
Vehicular Power Adaptor Holder PMLN6075
Vehicular Power Adaptor (NTNN8040/
PMLN7825A)
Jack Screw (x2)
2