Motorola Solutions PMLN8305 Manuel D'installation Et D'utilisation page 23

Figure 13: MXP600 Radio
1
3.2
Removing the Radio from the Cradle
Procedure:
Press down on the cradle release button and lift the radio upwards from the cradle.
See Figure 12: Vehicular Cradle on page
3.3
PMLN8305 and PMLN8306 Vehicular Cradle Kit Operation
This kit is designed to provide a mounting solution to the appropriate radio.
The cradle secures the radio and does not provide any charging function.
3.4
PMLN8307, PMLN8308, PMLN8309, and PMLN8310 Vehicular
Cradle Kit Operation
The Vehicular Cradle Kits are designed to operate with the MXP600 radio with Motorola Solutions-
approved battery packs and Vehicular Power Adaptor (NNTN8040).
When the radio is placed in the cradle, battery charging automatically takes place if the ignition is set
to ON. In case of a completely flat battery, the Vehicular Cradle Kit provides charging operation to
the radio one minute after being placed in the cradle. Battery charging status can be determined by
referring to the radio display.
1
22.
Chapter 3 : Vehicular Cradle
RF Dust Cover
MN007820A01-AC
23