Scrigno Antamatic Open 2.0 Manuel D'installation page 57

EN
MOUNTING THE JUNCTION BRACKET
16a
FOR ESSENTIAL PRO FRAME
Prepare the belt joint bracket
A
according to the SCRIGNO frame
model.
For Essential PRO kits.
C
Tighten the screw on the front
hanger (closing upright!)
For BASE and
DOORTECH kits
(remove rubber
bumper)
B
Fit the screw into the door bracket
and into the junction bracket
Closing
upright
Open
2.0
Opening
upright
R1387 DCM2461/SCRIGNO | page 9