Scrigno Antamatic Open 2.0 Manuel D'installation page 56

Open
2.0
MOUNTING THE JUNCTION BRACKET
16
FOR BASE FRAME AND DOORTECH
Prepare the belt joint bracket
A
according to the SCRIGNO frame
model.
For Essential PRO kits
Screw up the 2 hex head screws
C
without fully tightening.
R1387 DCM2461/SCRIGNO | page 8
B
Closing
upright
For BASE and
DOORTECH kits
(remove rubber
bumper)
Mark the position of the 2 holes in the centre of the door, using the
bracket as a reference. Drill a hole in the door with a suitable drill bit.
=
D
Remove the bracket
Opening
upright
=
EN