Publicité
CAMSHAFT AND ROCKER ARMS
REMOVAL POINTS
Rocker arm shaft
NOTE:
Use a slide hammer bolt 1 and weight 2 to
slide out the rocker arm shafts.
INSPECTION
Camshaft
ASSEMBLY AND INSTALLATION
4 - 14
1. Remove:
Rocker arm shafts
Slide hammer set:
YU-1083-A
Slide hammer bolt:
90890-01085
Weight:
90890-01084
1. Measure:
Cam lobes length a and b
Out of specification → Replace.
Cam lobes length limit:
Intake:
a 25.328 mm (0.9972 in)
b 20.934 mm (0.8242 in)
Exhaust:
a 25.186 mm (0.9916 in)
b 20.947 mm (0.8247 in)
1. Apply:
Molybdenum disulfide oil
(onto the camshaft cam lobe)
Engine oil
(onto the camshaft bearing)
2. Install:
Camshaft 1
ENG
Publicité
