Publicité
PRE-OPERATION INSPECTION AND MAINTENANCE
Dealer
Item
Note
*
Chassis fasteners
Sidestand
1
*
*
Spark arrester
*
Front fork
Rear shock
*
absorber assembly
*: Since these items requires special tools data and technical skills, they should be serviced.
1
*
: For USA
SERVICE NOTES:
No. 1. DRIVE CHAIN: In addition to tension and alignment, chain must be lubricated every
0.5 ~ 1.0 hour. If unit is subjected to extremely hard usage and wet weather riding, chain
must be checked constantly. See "Lubrication Intervals" for additional details.
No. 2. AIR FILTER: Remove and clean filter every 20 ~ 40 hours.
PRE-OPERATION INSPECTION AND MAINTENANCE
Before riding for break-in operation, practice or a race, make sure the machine is in good operating
condition.
Before using this machine, check the following points.
GENERAL INSPECTION AND MAINTENANCE
Item
Brake
Check operation/adjustment.
Engine oil
Change oil as required.
Drive chain
Check alignment/adjustment/lubrication.
Spark plug
Check color/condition.
Throttle
Check for proper throttle cable operation.
Air filter
Foam type – must be clean and damp oil always
Wheels and tires
Check pressure/runout/spoke tightness/bead stopper/axle nuts.
Fittings/fasteners
Check all – tighten as necessary.
Checks and maintenance jobs
Make sure that all nuts, bolts and screws are
properly tightened.
Tighten if necessary.
Check operation.
Lubricate and repair if necessary.
Clean.
Check operation and for oil leakage.
Correct accordingly.
Check operation and shock absorber for oil
leakage.
Replace shock absorber assembly if necessary.
Routine
3 - 2
INSP
ADJ
Initial
Every
10 hours
60 hours
120 hours
(1 month)
(6 months)
(12 months)
Page
P3-11
P3-5 ~ 7
P3-12
P3-19
P3-3
P3-3 ~ 4
P3-15 ~ 17
P2-13
3
Publicité
