EUROM Golden 2000 Slim Manuel D'utilisation page 35

Warning: If the infrared patio heater is switched off only by means of the remote
control, it stays on 'stand by'. Therefore, always switch off the infrared patio heater
using both remote control, the on/off switch and take the plug out of the socket.
Cleaning, maintenance and service
Cleaning
This infrared patio heater consists of a sturdy and maintenance-free aluminium
housing with a protective grid for the lamp. Before you clean the outside of the
heater, always take the plug out of the socket and let the lamp cool down. Clean
the infrared patio heater with a clean, soft, lint-free cloth or a soft brush. Do not
use any aggressive cleaning agents, scouring sponges or abrasive brushes and no
chemical cleaning agents; these can damage the material. In addition, never use
flammable cleaning materials, such as benzene or alcohol. Let the infrared patio
heater dry well before using it again.
Never immerse the plug, electric cable or any other part of the infrared patio heater
in water or in any other liquid. That could result in an electric shock.
Maintenance
There are no parts in the infrared patio heater that require maintenance or that can
be replaced/repaired by the user. The appliance is extremely watertight (IP65,
watertight against spray) and therefore, may not be opened by unqualified persons.
The lamp is of very high quality. Its potential lifespan is 8,000 burning hours and in
case of normal use, there is no need to replace it. Very intensive use could
accelerate its aging and of course it could break as a result of an accident. In such
a case, turn to your supplier or a certified electrician. The lamp has a special
connection and may not be removed or replaced by an unauthorised person.
Service
Any repairs must be done by specialists trained for that purpose (supplier or
certified electrician) in order to guarantee safety. Any damage or malfunctioning as
a result of repairs carried out on or changes made to the appliance by unqualified
On
Off
Press ON to start the appliance. The infrared
patio heater has a 'slow start' at 33%
output. After 4 seconds, the infrared patio
heater switches to the most recently used
output. During the initial use, the infrared
patio heater switches to 100% output after
4 seconds.
Press OFF to shut down the appliance
35