Safety Functions
•
On/off switch (picture 10, no. 40)
The on/off switch switches off the en-
gine. It must be in position
to restart the engine.
Throttle lock (picture 10, no. 41)
•
Prevents accidental acceleration of
the engine. The throttle can be oper-
ated only when the throttle lock is
depressed.
•
Protective covers
(Picture 1, nos. 15 + 20)
Protect the operator from accidental
contact with the cutting tool and foreign
bodies being thrown out.
Functional Description
The manually operated and portable mo-
torised strimmer is driven by a combustion
engine, which operates without interrup-
tion during the work.
The power transmission is by means of a
clutch disc, which transmits the output to
the cutter via a centrifugal clutch at high
speed.
The equipment has an automatic double-
thread reel as the cutter as well as a
metal cutting blade, which can be fitted
optionally.
In the cutting process, two plastic wheels
or four metal blades rotate about an axis
vertical to the cutting level. To protect the
user, the equipment has a protective de-
vice, which covers the cutting device.
Please refer to the descriptions below for
how the operating parts work.
Delivery Contents (Picture 2)
Start by unpacking the equipment and
check that it is complete.
in order
•
Engine part with top shaft tube, accel-
erator cable and unfitted multifunction
handle (see picture 1)
•
Bottom shaft tube with cutting head
holder (see picture 1)
15 Protective cover / reel capsule (inc.
fixing accessories)
16+17 Reel capsule with thread reel
18 Metal cutting blade
20 Protective cover / metal cutting blade
(inc. fixing accessories)
24 Allen and Torx key
25 Metal pin
26 Maintenance key
27 Cable tie
28 Carrying strap
•
Instruction Manual
28
Assembly
Before initial operation of the equipment,
the two-part shaft tube must be assem-
bled, the handle fitted, the cutting device
with protective cover installed, the carry-
ing strap fitted, fuel filled and the equip-
ment checked.
15
16
17
20
GB
27 26
24
25
pic. 2
18
97