Publicité
Les langues disponibles
Les langues disponibles
GB
8. Let the engine warm up for about 10 se-
conds.
9. If the equipment does not start, repeat
stages 3 to 5.
10. Attach the equipment to the carry-
ing strap that has been put on (see
chapter on "Putting on the Carrying
Strap").
11. To mow, hold the throttle lock (41) de-
pressed and operate the throttle (42).
When the throttle is operated, the
choke lever (4) automatically jumps
into the "RUN" position.
12. To switch off the engine, set the on/off
switch (40) 0 .
pic. 10
40
41
43
42
3
10
3
If the engine fails to start after a
second attempt, try to start it in the
"RUN" (warm start) position with-
out the choke.
If this is unsuccessful, follow the
instructions in the chapter on
"Troubleshooting".
102
Operation
Working Notes
•
•
•
•
21
Work safely and considerately!
•
•
4
•
•
•
•
•
10
•
•
•
Working with the Thread Reel
•
When cutting, observe the country-
specific / local regulations.
Do not cut during commonly applica-
ble quiet periods.
Solid objects such as stones, metal
pieces or similar must be removed.
These can be thrown out and there-
fore result in personal or property
damage.
When cutting in high bushes or hedg-
es, the working height should be at
least 15 cm. This prevents the risk to
animals, e.g. hedgehogs.
Always hold the equipment firmly and
securely with both hands
(see picture 8).
Cut only grass and weeds. Be aware
of roots or tree stumps – risk of trip-
ping.
Work considerately and endanger no-
body when cutting. Work quietly and
carefully.
Work only in adequate visibility and
lighting conditions.
Keep an eye on the cutting head.
Never cut above shoulder height.
Never replace the plastic cord with a
steel wire – risk of injury and damage.
Do not work on a ladder.
Work only on firm and stable bases.
Always carry the equipment suspend-
ed by the shoulder strap or on the
tube
On small grass areas, hold the equip-
ment at an angle of approx. 30° and
turn evenly to the right and left with a
Publicité
