Publicité
Les langues disponibles
Les langues disponibles
GB
Maintenance intervals
Machine Part
Screws, nuts, bolts
Air filter
Fuel filter
Spark plug
Fuel hoses
Complete machine
Operating handle
Cutting head
Adjusting the Carburettor
The carburettor is preset in the factory for
optimal performance. If subsequent ad-
justments are required, have them carried
out by a specialist workshop.
Storage
General Storage Instructions
•
Clean the equipment and accessories
carefully before storage.
•
Keep the equipment in a dry and dust-
proof place out of reach of children.
•
Do not wrap the equipment in plastic
bags, as damp and mould may form.
•
Do not store the equipment on the
protective cover; ideally hang it from
the top handle.
106
Action
Check, tighten
Clean or replace
Replace
Clean/adjust/replace
Check, replace if necessary
Check, clean if necessary
Check for function
Check correct installation
Storage During Working
Breaks
1. Drain the fuel tank in a well-ventilated
2. Start the engine and allow it to tick
3. Allow the engine to cool (approx. 5
In case of working breaks of more than
3 months:
4. Loosen the spark plug with a spark plug
Before
Each Use
Non-observance of the storage in-
structions can cause starting problems
or permanent damage as a result of
fuel residues in the carburettor.
place.
over until the engine stops and the
carburettor is free of fuel.
minutes).
wrench (see "Changing/Adjusting the
Spark Plug").
Operating Hours
10
20
Publicité
