Selecting Pretext; Printing - Reiner jetStamp 790 Mode D'emploi

jetStamp 790/790 MP

1.8. Selecting pretext

The following pretexts can be set for the imprints P : 01 to P : 25.
RECVD
SENT
FILE
_ _ _ _ _ (= pretext switched off)
Press [MODE] until [NO/TXT] appears in the display menu bar.
f
Press [NO/TXT].
f
"INPUT - REPETITION" appears.
Press [NEXT] until "INPUT - PRE TEXT" appears in the display menu bar.
f
To select pretext, press [VARY].
f
Press [NEXT] until the required pretext appears.
f
To save selected pretext and to return to the main menu,
f
press [RETURN] twice.
The main menu appears.

1.9. Printing

WARNING
Danger of blinding at contact of the ink with the eyes.
Do not point the jetStamp 790's nozzles
f
Print imprints
Set desired imprint.
f
Put the device on the area to be printed on.
f
Push trigger button
f
The selected imprint is printed.
Troubleshooting
If "IMPRINT BLOCKED" appears in the display, the print trigger is blocked.
Press [QUIT] to release the print trigger once.

Proceed as described on page 74 to release the print trigger permanently.

62
INV.
ORDER
ENT.D
Fig. +
A B

1
.
DRAFT
PAID
RECPT
14
towards the face of persons!
FAX
ORIG
REG.D