Menu Commands; Objects - Reiner jetStamp 790 Mode D'emploi

jetStamp 790/790 MP

4.4.1. Menu Commands

Symbol Command
Transfer of external
imprints
Select imprints
P : 26 to P : 29
Transfer
Exit

4.4.2. Objects

Imprints are assembled from objects of the four object groups described below.
Objects can be positioned by "drag and drop".
The properties of each object group can be configured. Menus for format settings are
called by right-clicking the respective object. Further information is contained in the
online help (see "Online Help", page 78).
b
Symbol bar
80
Command Description
The text in the text input field is inserted into the lines of
Text
the imprints by dragging and dropping a text object.
A time object can be positioned either in the first
Time
or second line.
Only one date object per line is admissible. The calendar
Date
dates of the different date objects can be set deviating from
each other.
A numberer object can be positioned either in the first or
Numberer
second line. The numberer serves consecutive numbering
For detailed information, see "Numberer", page 64.
Description
Transfer external imprints in the format .pcr
from a data carrier to the jetStamp 790.
Use the arrows switch between display of the
imprints P : 26 to P : 29 for configuration.
Transfer imprints P : 26 to P : 29 to the
jetStamp 790.
Terminate programme.